Quality Control Checklist for Terry Bathrobes From Bangladesh

This terry bathrobes quality control checklist lets you check a shipment before it leaves Bangladesh. A robe is judged in use: loops that shed water instead of absorbing it, a belt loop that tears when the robe is tied, or a shade that changes between body and collar shows at once. For ordering, classification and shipping, see the companion guide on how to import terry bathrobes from Bangladesh. Work from pieces drawn randomly across sizes, colors and cartons.

Why this checklist matters

A terry bathrobe combines a garment and a towel. The garment side is decided by measurements, collar, belt, pockets and seams. The towel side is decided by the pile: how evenly the loops stand, how much water the fabric takes up, and how the shade holds. A robe that sews well can still fail as a towel.

A written checklist removes interpretation. Each point is checked against the sample, size chart and specification, and recorded as pass, fail or not applicable. Absorbency is part of the product definition: ASTM D4772 covers surface water absorption testing for terry fabrics for products including bathrobes.¹

Before you start

Do not begin until the references are complete: an approved sample per style and color, the purchase order, the size chart with tolerances, the fabric specification and the packing specification. Agree test methods and pass criteria in the purchase order first.

Check the label plan before bulk labels are printed. Under Regulation (EU) No 1007/2011, a textile product shall be labelled with the name and percentage by weight of all constituent fibres in descending order.² ISO 3758 establishes a system of graphic symbols for care labelling, based on the most severe treatments that do not cause irreversible damage.³

The full checklist (numbered, printable)

Measurements and garment construction

1. Lay each robe flat, smoothed without stretching, and measure body length, chest width and sleeve length against the size chart.

2. Measure the collar or shawl front from neck point to hem, and check both fronts match.

3. Check the neckline and shoulder line for symmetry, and confirm the robe hangs level.

4. Check the collar construction named in the specification, such as a shawl collar or kimono front, against the sample, including at the back neck.

5. Compare every measurement with the chart tolerance, and record actual values rather than pass marks alone.

6. Confirm each size label matches the measured size, and mixed sizes in one carton follow the packing specification.

Terry pile, fabric and weight

7. Check the pile face and back panel by panel for even loop density, with no bare patches, thin areas, pulled loops or snags.

8. Check loop height and direction across body, sleeves, collar, belt and pockets, and that cut edges have not stripped the loops.

9. Check the ground fabric under the pile for grin-through, holes, broken yarns and weaving flaws.

10. Verify fabric weight by the weigh-and-measure method. Under ISO 3801, specimens of known dimensions are weighed and the mass per unit area is calculated from the measured length, width and mass.⁴ No standard sets a required weight for a bathrobe, so the agreed figure is your own specification choice.

11. Check shade within each robe, between body, collar, belt and pockets, and between robes in one carton, under the same light, against the lab dip.

12. Check face and back for stains, oil marks, dye spots and uneven dyeing, including inside pockets and under the collar.

Belt, belt loops, pockets and trims

13. Check the belt: present where specified, in the agreed length and width, with finished ends, even stitching and no twisting.

14. Tie the belt as a wearer would: it passes through every loop, reaches the specified tie position, and holds without bunching.

15. Check every belt loop for position, secure attachment at both ends and reinforcement where required, pulling each firmly by hand.

16. Check that belt loops sit at the same height on both sides, with none sewn into a side seam or loose at one end.

17. Check pockets for symmetric placement, even openings and level top stitching, and pull each pocket corner by hand.

18. Check inside each pocket: no raw edges, loose threads or trapped trimmings.

19. Check the hanging loop at the back neck where specified: present, centered and secure.

20. Check embroidery or a logo where specified for placement, spelling, thread colors and a clean back finish.

Seams and stitching

21. Check side seams, shoulder seams, sleeve setting and hems for skipped or broken stitches, seam opening and uneven stitch density, pulling each by hand.

22. Check hems around the robe and at the sleeve ends for even width, straight stitching and secure finishing, with no wavy edges.

23. Check that inside edges are finished as specified, with no raw terry edges to shed loops in washing.

24. Where seam strength is lab tested, confirm the method and limit were agreed in advance. ISO 13935-1 specifies a strip test for maximum force to seam rupture, force applied perpendicularly to the seam.⁵

Absorbency, hand feel and washing

25. Check absorbency on the body and sleeve of each drawn robe: water on the pile is taken in by the loops rather than beading or running off.

26. Where absorbency is lab tested, confirm the method was agreed in advance. ASTM D4772 measures how a terry fabric absorbs and retains water run over its surface, and is recommended for quality control testing during manufacturing.¹

27. Check hand feel against the approved sample: compare softness, body and loop resilience per color, and record any robe that feels harsh, limp or thinner.

28. Review dimensional change evidence where required, for length, width and sleeve length after washing, and judge it against the tolerance in your purchase order. ISO 5077 specifies a method for determining dimensional change of fabrics, garments or other textile articles in specified washing and drying procedures.⁶

29. Check appearance after washing where required: loop distortion, collar shape, belt twisting and seam puckering.

30. Confirm every wash report names the bulk fabric, color and lot.

Color fastness: washing, rubbing and perspiration

31. Review washing fastness evidence where required. ISO 105-C06 specifies methods for determining the resistance of textile colour to domestic or commercial laundering using a reference detergent.⁷

32. Review rubbing fastness evidence for dark colors. ISO 105-X12 specifies a method for determining the resistance of textile colour to rubbing off and staining other materials, with one dry and one wet test, and it covers pile fabrics.⁸

33. Review perspiration fastness evidence where required. ISO 105-E04 specifies a method for determining the resistance of textile colour to human perspiration.⁹

Labels, claims and packing

34. Verify that care, fibre, origin, size and brand labels are present, legible and correctly positioned. For the EU, check fibre names against Regulation No 1007/2011,² and care symbols against ISO 3758.³

35. If a harmful-substances claim will appear on the product, check the certificate scope. Under OEKO-TEX STANDARD 100, the label is awarded only if all components meet the criteria, including fabric, threads and finishes.¹⁰

36. Check that any other claim, such as a fibre or fabric weight claim, matches the evidence agreed, and record unsupported claims as failures.

37. Check that barcode and size stickers scan and match the purchase order, and that each robe is folded and packed as directed.

38. Weigh and measure sample cartons, and check markings and carton count against the packing list.

Common failures and how to fix them

The most frequent robe failure is a belt loop that tears away when the robe is tied, usually because it was sewn in at one end only or the reinforcement stitching was skipped. Stop, pull-test loops on finished robes, compare the attachment with the sample, and only then restart the line. Next is a pocket corner that opens in use, from stitching that stops short of the corner: re-sew a test pocket first.

Poor absorbency on a correct-looking robe usually traces to a finish left on the pile, which lets water bead instead of entering the loops: wash a drawn robe and repeat the check before the bulk is finished. Shade differences between body and collar, belt or pockets point to parts cut from more than one dye lot: re-sort robes before packing. Thin pile patches on one panel point to one fabric roll: segregate and re-inspect those robes as their own group. Shrinkage beyond the agreed tolerance traces to cutting before wash-testing: wash-test bulk fabric first.

Outside the agreed criteria, the options are re-inspection after sorting or rework, documented partial acceptance, or rejection.

Downloadable template / summary table

Copy the checklist into your inspection sheet with the size chart, tolerances and test methods.

How Exportain helps

Exportain is a B2B marketplace connecting buyers with Bangladeshi suppliers of home textiles, so the specification behind this checklist can be agreed at the enquiry stage. Browse suppliers, see the home textiles category and use inspection services when you plan the check. A related checklist is the bath towels quality control checklist. Supplier profiles show which document and photo checks have been recorded, not factory inspections. Exportain is not a party to the goods contract and does not inspect goods.

FAQs

When should this checklist be used?

Use it at final inspection, when robes are finished and largely packed. For larger and first orders, also use it in production, while faults can still be corrected.

Who should complete it?

The buyer, a local agent or an independent inspector can complete it, using the approved sample, size chart and randomly drawn pieces.

What are the most common failures?

Torn belt loops, opening pocket corners, poor absorbency from a finish on the pile, shade differences between body and belt or collar, thin pile and shrinkage beyond the agreed tolerance.

Can a third party do it?

Yes, if you share the references, tolerances and test methods first.

Next steps on Exportain

Before production starts, agree your size chart, fabric specification, tolerances, test methods and label wording, then read how to import terry bathrobes from Bangladesh and plan it with inspection services. You can also post a free RFQ via RFQs.